12V LED Driver Power Supply 24W–480W for LED Strip Lighting ~1009

Power compatible 12V LED strip lighting, RGB LED strips and other suitable low-voltage equipment with this 12V 480W LED power supply. Designed to convert 100–240V AC mains input to a regulated 12V DC output, this constant-voltage switching power supply is suitable for fixed indoor lighting installations.

With a rated output of 480W and 40A at 12V DC, this high-capacity 12V LED driver is designed for larger compatible LED lighting loads. The aluminium housing provides a practical enclosure, while screw terminals allow direct hard-wired connections for suitable installations.

Key Features

• 12V DC constant voltage: Converts 100–240V AC mains input to a regulated 12V DC output.
• 480W output power: Provides up to 40A at 12V DC for compatible high-power LED applications.
• Wide input range: Designed for 100–240V AC input at 50/60Hz.
• IP20 construction: Suitable for protected, dry indoor installations.
• Non-dimmable: Designed for standard constant-voltage LED applications.
• Screw-terminal connection: Suitable for fixed hard-wired installations.
• Aluminium housing: Provides a practical metal enclosure for the power supply.
• Built-in protection: Includes overload, over-voltage and short-circuit protection.
• Suitable for LED strips: Designed for compatible 12V LED strip and RGB LED strip lighting.

Technical Specifications

• Product type: 12V DC LED switching power supply
• Input voltage: AC 100–240V
• Input frequency: 50/60Hz
• Output voltage: DC 12V
• Output current: 40A
• Output power: 480W
• IP rating: IP20
• Dimming: Non-dimmable
• Connection type: Screw terminals
• Housing material: Aluminium
• Protection: Overload, over-voltage and short circuit
• Dimensions: 216mm L × 114mm W × 50mm H
• Application: Indoor use

What's Included?

• 1 × 12V 480W switching power supply

Important: This is an IP20 indoor power supply and is not suitable for exposed or wet locations. Check the required voltage, total load, polarity, dimensions and installation requirements before purchase. Disconnect the mains supply before installation or maintenance.